Dusty Strings Harp and Hammered Dulcimer Makers logo(206) 634-1656

Updates: We have just migrated our website and have some details to clean up, so please pardon the mess! We’d also like to ask for your patience if we are slower than usual to respond to orders, emails, and phone calls. We are still dealing with the challenges of operating a manufacturing business safely during COVID, and we are working with limited staff capacity. Thank you!

Harp Accessories
>
Harp Tools & Maintenance Supplies
>
A la Carte Levering & Regulation Tools

A la Carte Levering & Regulation Tools

Levering and regulation tools laid out horizontally. From top to bottom: 1/4" wrench, 5/32" nut driver, 3/16" nut driver, 7/64" ball driver, 5/32 open end wrench.
$
0.00
Please call to order.
$
0.00
Temporarily Out of Stock
Quantity:
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Quantity:
1/4" open end wrench
for Loveland lever cams
$
7.95
Temporarily
Out of Stock
5/32" nut driver
for medium bridge pins
$
9.95
Temporarily
Out of Stock
3/16" nut driver
for large bridge pins
$
9.95
Temporarily
Out of Stock
7/64" ball driver
for Loveland lever screws
$
6.95
Temporarily
Out of Stock
5/32" open end wrench
for beveled bridge pins
$
7.95
Temporarily
Out of Stock
T5 Torx driver
for small Camac lever handles
$
9.00
Temporarily
Out of Stock
T6 Torx driver
for large Camac lever handles
$
9.00
Temporarily
Out of Stock
T8 Torx driver
for Camac lever screws
$
9.00
Temporarily
Out of Stock
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Description

These are inexpensive versions of our Tool Kit tools that you can use for installing, regulating and adjusting Loveland and Camac levers and Dusty Strings threaded bridge pins. For basic instructions and a list of which tools will be helpful for your particular harp, download our General Lever Harp Regulation sheet. More detailed instructions can be found in our Levering and Regulation Guide Book.

If you have an older Dusty harp with round bridge pins, only the 1/4" open end wrench and the 7/64" ball driver will be of use to you. The other tools are specific to our threaded bridge pins. You can easily tell the difference because the threaded bridge pins have a hexagonal shape on the end, and the round ones are cylindrical.

Note: Some medium bridge pins may be crowded too closely to other hardware for the 5/32" nut driver to fit. In those cases, use the 5/32" open end wrench instead.

Reviews

For more details, please try this page:

No related items found.