Pickup Jack Clamp

Dusty harp pickup jack clamp
 
Pickup Jack Clamp
Dusty harp pickup jack clamp
the pickup jack clamp installed in the soundhole of a harp
closeup of dusty pickup jack clamp installed on a pedal harp
close-up of the pickup jack clamp on a harp

This accessory allows you to install a harp pickup without drilling a hole for the jack.

Jack Clamp

$54.95

The Pickup Jack Clamp is a clean and elegant solution for anyone who is thinking about installing a pickup but is reluctant to drill a permanent hole for the jack. This easy-to-use, repositionable clamp is designed to be used in conjunction with a pickup system, such as the Dusty Harp Pickup, and provides a removable way to securely hold the pickup jack in the back of the harp. It accepts a standard 1/4" jack and is adjustable to fit a wide variety of lever and pedal harps. The lower soundhole is a suggested installation location, but your harp may have internal braces or features that would accept the jack clamp just as well. The rubber padding on the inside faces of the clamp will grip any surface and hold the clamp firmly in place without harming the instrument. You can experiment to find the location that works best for you.

Note: The Jack Clamp alone will not amplify your harp. You will also need a pickup and an amplifier or speaker system to plug into.